- Compact and robust design for minimum space requirement and maximum portability
- Various models, each covering different wavelength range
- Measurement of background free and interferometric autocorrelation functions
- NIST traceable calibration
- Standard Software Interface (using TCP/IP)
The Mini PD autocorrelator is a combination of compact size and single wavelength range to achieve the most cost effective, reliable and space saving APE Autocorrelators solution. The interferometer based autocorrelator is available in various wavelength ranges and can be used in collinear or non-collinear mode for added information, such as chirp or high dynamic amplitude range.
Equipped with a Software Interface (using TCP/IP) it can also easily be integrated into larger experimental setups and software controlled environments.
In combination with a high resolution digitization and fast processing, the miniLink provides the measured autocorrelation function and pulse width data at a high refresh rate and with a very high precision.
|Scan ranges [ selectable ]||150 fs … 15 ps [ 150 fs | 500 fs | 1.5 ps | 5 ps | 15 ps ]|
|Delay Resolution [ for selected scan range ]||< 0.001%|
|Measurable pulse width||< 10 fs … 3.5 ps|
|Input polarization||linear / horizontal|
|Input aperture diameter||free-space, 6 mm|
|Input repetition rate||> 300 Hz|
|Interaction Mode||collinear / non-collinear|
|Sensitivity 1||Typically 1 W2|
|Wavelength Versions||VIS 1||420 … 550 nm|
|VIS 2||540 … 750 nm|
|NIR||700 … 1200 nm|
|IR||1100 … 1800 nm|
|Max. input power||1 W or 10 µJ, whichever results in lower value|
|1 Sensitivity is defined as average power times peak power of the incident pulses PAV * PPeak.|
- Fiber Coupling [ SMA, FC/APC, FC/PC ]