- High resolution scanning spectrometer
- Wavelength range from UV to MIR
- Compact Design
- USB interface with supplied Windows-based software
- Standard Software interface (using TCP/IP)
The waveScan is an easy to use, high resolution device for spectral analysis of CW and mode-locked laser systems. With its resolution to less than 0.05 nm for the Blue version, it offers greater precision over a larger wavelength range compared to standard compact CCD based spectrometers.
The waveScan is available in different versions covering scan ranges from 200 … 6300 nm. Especially in the spectral region higher than 1100 nm, which lies beyond the capability of silicon based CCDs, it offers an easy way for a high resolution measurement.
Equipped with a Software Interface (using TCP/IP) it can also easily be integrated into larger experimental setups and software controlled environments.
|Configuration||Wavelength range||Resolution [ FWHM ]|
|UV||200 … 1100 nm||0.2 nm|
|BLUE||220 … 540 nm||0.05 nm|
|VIS-IR||500 … 1600 nm||0.2 nm|
|IR-Ext.||800 … 2600 nm||0.5 nm|
|MIR||1500 … 6300 nm||3 nm|
|Scan rate||~ 6 Hz|
|Input repetition rate||> 4 MHz (real time measurements)|
|> 1 kHz (accumulation mode)|
The easy-to-use Control Software supplied with the waveScan displays and stores the measured spectra on a standard PC (not included) and gives access to all measuring and calibration features.
The waveScan comes wavelength calibrated.
- Interchangeable fiber input1 [ SMA, FC/APC, FC/PC ]
1 Input from single mode fiber needed to achieve specified resolution. The use of a multimode fiber will decrease the resolution of the waveScan.